Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Details on Components (Gas)

Information about the Components section in Gas Pipe Network Calculation.

You are here:

AssistantsGas water / Drawing typeCalculationComponents

All settings specified in the section Components are saved in the components and pipes of the project.

Classify <

Opens the Assignment Calculation types dialog after selecting several different components. Here you can assign other calculation types from the module 3D Pipe&Power to the selected components. If multiple instances of the same component type are selected, the Classification dialog opens where you can assign a different calculation type from the module 3D Pipe&Power to the selected parts.

Pipe material <

After selecting pipes, this button opens the dialog Pipe tables, where you can assign pipe material to the selected pipes.

Technical data ...<

After selecting a component, this button opens the corresponding component dialog, in which technical data relevant for the calculation for that particular component can be entered.

Settings copy/reset

In this section, you initially use the checkboxes to select the properties you want to be copied or reset. These are calculation-, connector and material data from the technical data dialogs. Use the checkbox for all Components to decide, whether to consider all components or pipes of the same type when copying or resetting.

Element

Description

Calculation data

Activated: When copying or resetting components, technical data of the component coming from the section Calculation are considered.

Connections

Activated: When copying or resetting components, technical data of the component coming from the section Connections are considered.

Material data

Activated: When copying or resetting components, technical data of the component coming from the section Material data are considered.

Copy

Copies technical data from technical data dialogs, connector data, material data or lengths of pipes, if the respective checkboxes are activated.

To do so, you may at first click on the component the data of which you intend to copy. Transfer the data to a selection or to all components of the same type or to all pipes.

Reset

Resets the technical data or lengths of pipes if the respective checkboxes are activated. Resetting can be applied to all components or to a selection.

for all components

Activated: When copying or resetting, all components of the same type, all pipes or all ducts are considered.

Deactivated: Select the components, pipes or ducts for which you want to copy or reset the technical data.