Direkt zur Hauptnavigation springen Direkt zum Inhalt springen

Details on Usage Profiles

Information on the Usage profiles dialog in the dynamic cooling load calculation.

Usage profile sets

Usage profiles define the percentage of internal loads in hourly cycles over a 24-hour period and are grouped into usage profile sets.

You can manage usage profiles at any level (project, building section, story, apartment or room). However, the assignment of usage profiles to internal loads is only done on the project level via the Assignment of internal loads button, and on room level via the selection of the corresponding internal load.

You are here:

Module overviewCooling load dynamicProject levelUsage profiles

Diagram

In the diagram, the percentage of the usage profile set that was last selected in the table is displayed for the working days (WD) or for the non-working days (NWD).

Table

Set name

Name of the usage profile set. You can edit the name by clicking in the field. F5 or click in an empty line creates a new set. F6 deletes the selected set.

WD

Displays the set parameters of the profile for the working day. Click opens the corresponding profile.

NWD

Displays the set parameters of the profile for the non-working day. Click opens the corresponding profile.

Used in

Indicates in how many rooms of the building structure the selected usage profile set is used.